Shelves whose heights are adjustable to make room for tall and short objects. They are supported by shelf holders, such as pegs and dowel pins.

A cabinet that is underneath a wall cabinet or wall diagonal cabinet used to keep items off of the countertops. Appliance garages are equipped with a flexible, sliding door or shutter that looks like a garage door.

Smooth gliding guides that are usually side mounted. These guides slide on small metallic balls that bear the weight of the drawer.

The cabinet box that sits on the floor. These cabinets support the countertops.

A diagonal corner cabinet that fits a base corner that goes in at a 45 degree angle to provide more counter and storage space. It may feature adjustable or fixed shelves or spinning trays (lazy susan trays).

A type of paneling that consists of thin raised strips

One of the strongest cabinet hardwoods with a distinct, moderate grain pattern that ranges from straight to wavy or curly. The predominant sapwood color is white to creamy yellow while the heartwood varies in color from medium or dark brown to reddish brown.

Any wall cabinet that is less than 30 inches high. Commonly used over microwaves and refrigerators.

Door on a double door cabinet that when closed, nearly touch each other. Typically, a 1/8" gap is allowed between the butt doors.

A cylindrical lock or fastener commonly used for cabinets. Often there will be a male and female part. Once inserted, simply turn the metal piece 180 degrees clockwise to lock into place. Cam locks are an easy and secure way to connect cabinet panels. They are commonly found in ready-to-assemble cabinets.

The "box" or elemental parts that make up the basic structure of a base or wall cabinet piece.

Vertical strips of wood that divide cabinets for extra support and durability. Usually seen on larger width cabinets.

An elegant, multi-colored hardwood, which may contain small knots and pin holes. Natural or light stains accent these color variations making a distinctive statement in a full kitchen. Like a good wine, Cherry wood will naturally darken or "mellow" with age and will look richer over time. Exposure to natural light will hasten this process, which wood lovers consider a natural benefit to owning solid cherry cabinetry.

A hinge that is not visible on the front of a cabinet door. Concealed Hinges are attached to the inside surface of the door.

A decorative bracket that can sometimes be used as a support piece for mantels, shelves, countertops and more.

In general, this is any molding that is applied to the top of wall cabinets. It provides a decorative, finished look.

a groove that is cut into a piece of material so that another piece may slide into it. The inside surface of cabinet drawers may be 'dadoed' with a groove to accept the drawer bottom panel which helps make for a stronger joint between the drawer side and bottom panels.

Fake doors that have the same door style as the cabinets. They are usually installed on the side of the end cabinets or on the back of an island or peninsula. These cabinetry moldings are designed to look like doors, but do not actually open.

Any trim molding with a tooth-like pattern.

A finished panel used to cover the exposed side of a dishwasher. This panel looks like the finished side of a cabinet and provides support for the countertop.

Do it yourself.

Woodworked joints that are used to connect drawer sides to the drawer face without the use of exposed hardware. These joints are known for their durability. The wood is cut in a series of angled portions that look like dove tails. These "tails" interlock and are difficult to separate once attached.

The panel that is attached to the front of a drawer box. It is also referred to as the 'drawer face and is the visible front part of the drawer that the handle/knob is attached to.

Usually used next to dishwashers or refrigerators. They will have a 1 ½" 3" stile (filler) on the front to give the appliance a 'built-in' look.

A fast drying white protective coating that is baked into hardware metal guides. It is low VOC and can be used for side-mount and under-mount hardware.

A hinge type that is visible on the outside edge of the cabinet door when the door is closed.

The wood frame that is attached to the front edges of the top, bottom and sides of the cabinet box. The door gets hinged to the face frame. This frame helps provide rigidity to the box. Cabinet designs that incorporate this feature are called "framed" or "face-frame" cabinets.

A finished strip of wood usually three or six inches wide used to fill spaces between cabinets or between cabinets and walls. These can normally be cut to size if necessary.

Grooves or routings adorned in wood to add detail or accent finishes. Commonly seen as fluted fillers.

A cabinet design that uses a 'face-frame' which is typically a wood frame attached to the front edges of the cabinet box (where the door gets hinged to).

A cabinet design that does not use a frame on the front outside edges of the cabinet box. The front of the cabinet box is formed by the edges of the top, bottom and side panels of the cabinet box. The cabinet door typically covers these edges when closed.

Hardware that provides full-access to drawers and allows the drawer to pass the face frame.

A cabinet design whereby the cabinet door or drawer front covers the entire face frame so that only the cabinet door is seen with no part of the face frame visible. A cabinet is also considered full-overlay when the reveal is less than ¼ inch.

The most elaborate standard kitchen design, G-shaped kitchens are like U-shaped ones but with a peninsula at one of the ends. These kitchens have the maximum amount of space for preparation, storage and dining.

A kitchen design that consists of two parallel counters, one with two of the three work triangle appliances and the other with one.

A glass rack can be placed under any wall cabinet but is usually mounted under a wine rack. It holds any type of stemware.

A cabinet design whereby the cabinet door or drawer front partially overlaps the face frame. When the drawers/doors are closed, more than ¼ inch of the face frame remains visible.

A wood-based product that's produced by the combination of very small wood fibers and a glue, resin or similar bonding agent. HDF can be more easily shaped than products like particle board due to the consistency of the material formed by the small fibers. HDF can be used for shelves, doors (typically painted or covered with melamine) and other cabinet parts. It is very dense and resists warping. It is commonly seen in the center panels of recessed cabinet door styles (like a Shaker door) to prevent warping and cracking of the center panel during the wood’s natural expansion and contraction throughout the year.

A strong, open grained wood known for its flowing grain pattern and dramatic variation in color - a "wood lover's wood." It's not uncommon to see doors or parts of doors that range in color from light to a deep brown when finished in a light or natural stain. Darker stains will mildly tone these color variations while knots and mineral streaks can also be evident in the finish. End grain is open and will often telegraph the finish. These characteristics are what make each Hickory cabinet and kitchen unique, while crossing a variety of designs.

A cabinet design whereby the doors fit inside of the face frame when closed (rather than overlapping and sitting on top of the face frame).

Large finished panel used to finish the back of cabinets for an island or peninsula. It can also be cut to size to be used anywhere in the kitchen where needed.

A kitchen designed in the shape of an L, two connecting sides with a corner cabinet in the center.

An easy-reach base cabinet that has two spinning trays inside. This cabinet also has two doors hinged together and is placed at a 90 degree angle in order to allow maximum storage space. Occasionally, lazy susan cabinets will feature a single 45 degree angled door.

A strong wood that is mostly off-white in its raw state. Hard maple is somewhat uniform in appearance, making it ideal for smooth, clean looks. It is usually straight-grained but can be wavy or even curly. Hard maple contains light hues of yellow-brown and pink and occasionally light tan or reddish-tinged streaks that will darken with stain. Burling, bird's eye markings and grain variations may also be inherent in maple cabinets. Maple is a popular selection for a more even-toned wood species. You can even mix finishes and wood species to create a more eclectic room.

A wood-based product that's produced by the combination of very small wood fibers and a glue, resin or similar bonding agent. MDF can be more easily shaped than products like particle board due to the consistency of the material formed by the small fibers. MDF can be used for shelves, doors (typically painted or covered with melamine) and other cabinet parts. It is very dense and resists warping. It is commonly seen in the center panels of recessed cabinet door styles (like a Shaker door) to prevent warping and cracking of the center panel during the wood’s natural expansion and contraction throughout the year.

A durable plastic, similar to laminate that can be applied to certain areas of cabinets. It is easy to clean and resists stains, chipping and fading.

A woodworking joint where two beveled pieces adjoin to make a 90 degree angle..

Any of variously long, decorative pieces (commonly 8" in length) that adds finishing detail.

A means of wood joinery that involves part of one piece being inserted into a notch or hole in the mating piece. A typical mortise and tenon joint has a square protrusion coming off the end of one piece that fits tightly into a square 'hole' or notch in the piece it's joined to. The pieces that make up the outer frame of a cabinet door might be joined using this technique.

Mullions are glass window dividers inside cabinet doors and provide support.

A prominent, open grain that ranges in color from white, to yellow, to reddish brown. Sometimes streaked with green, yellow or black mineral deposits, red oak’s strong grain often varies from closely knit to a distinctive, sweeping arch pattern. Its timeless beauty blends with many different designs

An architectural shape consisting of a concave arch leading into a convex one.

A molding used to cover unfinished corners where the skin meets the cabinet edge. Commonly used to finish the back edges of islands.

A tall cabinet for built-in ovens. They come in single or double compartments to house single or double ovens or a combination of an oven and a microwave.

Overlay refers to the amount of face frame that is covered by the cabinet door or drawer front.

A cabinet design whereby the cabinet door or drawer front partially overlaps the face frame. When the drawers/doors are closed, more than ¼ inch of the face frame remains visible.

A wood product made up of very small wood pieces and fragments that are fused together with a glue or resin under mechanical pressure.

An extension from an existing counter or a wall. Peninsulas only have three exposed sides and do not require as much space for clearance as islands do.

Decorative and rectangular columns that are used to support bar or countertop extensions.

An all wood product made up of several layers of wood with the grain direction running at different angles with respect to each other. This orientation gives plywood greater strength and stability in comparison to solid wood. It reduces the tendency of wood to split when nailed at the edges and reduces expansion and shrinkage, providing improved dimensional stability.

A molding used between cabinets and flooring to cover gaps. A scribe molding may be used instead for smaller gaps.

The horizontal pieces of a face frame or door frame (in contrast to a "stile" which is the vertical member of the frame).

Doors that have slightly raised center panels.

Door style where the center panel is inset or recessed. A common example is a Shaker door style.

The exposed portion between the end of the cabinet face frame and the door.

Trays installed in base cabinets or pantries instead of the shelves that come with the cabinets. The trays pull out of the cabinets providing easier access to items.

Ready To Assemble

A small, thin molding used to cover gaps where the cabinet meets the wall or floor. It provides a finished and uniform look.

Drawers that have mechanisms or magnets that guide the drawer closed. These are not soft-closing.

Simple cabinetry door style that has a recessed panel design.

Drawer hardware that is mounted on the side of the drawer.

Drawer Skins are ¼ inch panels that are used to cover unfinished backs and sides. They can also be applied to the side panels of cabinets to cover scratches or cuts (also see End Panels).

A flat door panel with no design, moldings, recessed or raised areas. Commonly gives a more contemporary appearance.

Drawers containing a piston that respond to various levels of pressure and weight, absorbing the impact and closing the door slowly and safely.

The vertical pieces of a face frame or door frame (in contrast to the "rails" which are the horizontal pieces of the frame).

The bottom piece of a base cabinet that is recessed several inches from the front surface of the cabinet to allow room for a person's feet when standing in front of the cabinet.

Drawer hardware that is mounted underneath the drawer. Undermount guides can usually carry more weight than sidemount guides

U-shaped kitchens allow for the maximum amount of base and wall cabinets. They are shaped like a U, having three sides.

A decorative, flat molding piece used as a decoration or as a bridge between two cabinets. It is generally placed above sinks and windows.

Thin layers of wood applied to plywood or MDF before it's treated with stain. Veneers can be used on the sides of exposed cabinets (for example, on the end of a run of cabinets) and on the interior surfaces of cabinet boxes.

Cabinet boxes that are mounted to the wall.

An ergonomic diagram that aids kitchen designers in remodeling a kitchen based on spatial planning and functionality. The three points of the triangle are sink, refrigerator and stove/oven.